InSinkErator MS User Manual

Part No. 14703 - Rev ADISPOSER CONTROL CENTERInstallation Manual Model MSwww.insinkerator.com/foodservicePlease be certain that the person who install

10MS-6 Wiring DiagramP/N 14356B380/460 V3-phase1/2 to 10 HPCall Toll Free 1-800-845-8345 for the nearest InSinkErator Authorized Service Agency or to

2Table of ContentsIntroduction/Features Introduction ...3 Feature

Features/Mounting the Control Center3INTRODUCTIONThe MS Control Center is UL® and CUL® approved for use with InSinkErator Foodservice Disposers. See

Plumbing Connections4Figure 2. Typical Installation DiagramPLUMBING CONNECTIONSThe flow control valve, syphon breaker and solenoid valve are supplied w

5Electrical ConnectionsELECTRIC SHOCK • Turn off the electrical supply to the disposer before attempting any work on it. Use a voltmeter or cir

6Operating Instructions/TroubleshootingOPERATING INSTRUCTIONSTO START1. Check to ensure disposer is free of foreign objects.2. Ensure power is on.3. P

7MS-4 Wiring DiagramP/N 14356120 V1-phase1/2 to 2 HPCall Toll Free 1-800-845-8345 for the nearest InSinkErator Authorized Service Agency or to reach

8MS-5 Wiring DiagramP/N 14356A208 - 230 V1-phase1/2 to 2 HPCall Toll Free 1-800-845-8345 for the nearest InSinkErator Authorized Service Agency or to

9MS-5 Wiring DiagramP/N 14356A208 - 230 V3-phase1/2 to 5 HPCall Toll Free 1-800-845-8345 for the nearest InSinkErator Authorized Service Agency or to