InSinkErator F-1000S Instruction Manual download pdf (Page 4)

This warranty is provided by InSinkErator

, a business unit of Emerson Electric Co., (“InSinkErator” or “Manufacturer” or

“we” or “our” or “us”) to the original consumer owner of the InSinkErator product with which this warranty is provided (the

“InSinkErator Product”), and any subsequent owner of the residence in which the Product was originally installed (“Customer”

or “you” or “your”).

InSinkErator warrants to Customer that your InSinkErator Product will be free from defects in materials and workmanship,

subject to the exclusions described below, for a period of 1 year (the “Warranty Period”), commencing on the later of: (a) the

date your InSinkErator Product is originally installed, (b) the date of purchase, or (c) the date of manufacture as identified by

your InSinkErator Product serial number. You will be required to show written documentation supporting (a) or (b). If you are

unable to provide documentation supporting either (a) or (b), the Warranty Period commencement date will be determined by

Manufacturer, in its sole and absolute discretion, based upon your InSinkErator Product serial number.

Permitted Uses

You may use your InSinkErator Product hot/cold water tank and filter system in combination with any genuine InSinkErator

Product instant hot water dispensers and component parts, and with any authentic Dornbracht hot or hot/cold water dispensers

and component parts (collectively, “Dornbracht Water Dispenser”) which Dornbracht expressly states in writing is/are compatible

with such InSinkErator Product(s). Use of your InSinkErator Product with any other manufacturer’s products or in any combination

other than as expressly stated above will void this warranty.

What is Covered

This warranty covers defects in materials or workmanship, subject to the exclusions below, in InSinkErator Products used

by a consumer Customer for residential use only, and includes all replacement parts and labor costs. YOUR SOLE AND

EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE

INSINKERATOR PRODUCT, PROVIDED, THAT IF WE DETERMINE IN OUR SOLE DISCRETION THAT NEITHER REMEDY

IS PRACTICABLE, WE MAY PROVIDE YOU WITH A REFUND OF YOUR PURCHASE PRICE OR A CREDIT TOWARDS

ANOTHER INSINKERATOR PRODUCT.

What is not Covered

This limited warranty does not extend to and expressly excludes:

 • LossesordamagesortheinabilitytooperateyourInSinkEratorProductresultingfromconditionsbeyondthe

Manufacturer’s control including, without limitation, accident, alteration, misuse, abuse, neglect, negligence (other than

Manufacturer’s), failure to install, maintain, assemble, or mount the InSinkErator Product in accordance with

Manufacturer’s instructions or local electrical and plumbing codes.

 • Wearandtearexpectedtooccurduringthenormalcourseofuse,includingwithoutlimitation,cosmeticrust,scratches,

dents or comparable and reasonably expected losses or damages.

 • LossesordamagescausedbytheDornbrachtWaterDispenser

In addition to the above exclusions, this warranty does not apply to InSinkErator Products installed in a commercial or

industrial application.

No Other Express Warranty Applies

This warranty is the sole and exclusive warranty provided to the Customer identified above. No other express warranty, written

or verbal, applies. No employee, agent, dealer, or other person is authorized to alter this limited warranty or make any other

warranty on behalf of Manufacturer. The terms of this warranty shall not be modified by the Manufacturer, the original owner, or

their respective successors or assigns.

What we will do to Correct Problems

If your InSinkErator Product does not operate in accordance with the documentation provided to you, or you have questions

concerning your InSinkErator Product or how to determine when service is needed, please call the toll free InSinkErator

AnswerLine at 1 (800) 558-5700, or visit our website at www.insinkerator.com. You may also notify us at: InSinkErator Service

Center, 4700 21st Street, Racine, Wisconsin 53406 USA.

The following information must be provided as part of your warranty claim: your name, address, phone number, your

InSinkErator Product model and serial number, and if necessary, upon request, written confirmation of either: (a) the date shown

on your installation receipt, or (b) the date shown on your purchase receipt.

Manufacturer or its authorized service representative will determine, in its sole and absolute discretion, if your InSinkErator Product

is covered under this warranty. You will be given the contact information for your closest authorized InSinkErator Service Center.

Please contact your InSinkErator Service Center directly to receive in home warranty repair or replacement service. Only an

authorized InSinkErator service representative may provide warranty service. InSinkErator is not responsible for warranty claims

arising from work performed on your InSinkErator Product by anyone other than an authorized InSinkErator service representative.

If a covered claim is made during the Warranty Period, Manufacturer will, through its authorized service representative, either

repair or replace your InSinkErator Product. Cost of replacement parts or a new InSinkErator Product, and cost of labor for repair

or installation of the replacement InSinkErator Product are provided at no cost to you. Repair or replacement shall be determined

by Manufacturer or its authorized service representative in their sole discretion. All repair and replacement services will be provided

to you at your home. If Manufacturer determines that your InSinkErator Product must be replaced rather than repaired, the

warranty on the replacement InSinkErator Product will be limited to the unexpired term remaining in the original Warranty Period.

Limitation of Liability

TO THE EXTENT PERMITTED BY LAW, IN NO EVENT SHALL MANUFACTURER OR ITS AUTHORIZED SERVICE

REPRESENTATIVES BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, INCLUDING

ANY ECONOMIC LOSS, WHETHER RESULTING FROM NONPERFORMANCE, USE, MISUSE OR INABILITY TO USE THE

INSINKERATOR PRODUCT OR THE MANUFACTURER’S OR ITS AUTHORIZED SERVICE REPRESENTATIVE’S NEGLIGENCE.

MANUFACTURER SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY DELAY IN PERFORMANCE AND IN NO EVENT,

REGARDLESS OF THE FORM OF THE CLAIM OR CAUSE OF ACTION (WHETHER BASED IN CONTRACT, INFRINGEMENT,

NEGLIGENCE, STRICT LIABILITY, OTHER SORT OR OTHERWISE), SHALL MANUFACTURER’S LIABILITY TO YOU EXCEED THE

PRICE PAID BY THE ORIGINAL OWNER FOR THE INSINKERATOR PRODUCT.

The term “consequential damages” shall include, but not be limited to, loss of anticipated profits, business interruption, loss of

use or revenue, cost of capital or loss or damage to property or equipment.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not

apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

IN-HOME FULL SERVICE LIMITED WARRANTYIMPORTANT SAFETY INFORMATION

InSinkErator

may make improvements and/or changes in the specifications at any time, in its sole

discretion, without notice or obligation and further reserves the right to change or discontinue models.

6 7

To reduce the risk associated with property damage due to water leakage

or flooding:

To reduce the risk associated with hazardous voltage due to an installer drilling

through existing electric wiring or water pipes in the area of installation: Do not

install near electric wiring or piping which may be in path of a drilling tool when

selecting the position to mount the system bracket.

To reduce the risk associated with the ingestion of contaminants: Do not use with

water that is microbiologically unsafe or of unknown quality without adequate

disinfection before or after the system.

• Read and follow Use Instructions before installation and use of this system.

• Installation and use MUST comply with all state and local plumbing codes.

• Protect from freezing, remove filter cartridge when temperatures are expected to

drop below 40° F (4.4° C).

• Do not install systems in areas where ambient temperatures may go above

110° F (43.3° C).

• Do not install on hot water supply lines. The maximum operating water

temperature of this system is 100°F (37.8°C).

• Do not install if water pressure exceeds 120 psi (827 kPa). If your water pressure

exceeds 80 psi (552 kPa), you must install a pressure limiting valve. Contact a

plumbing professional if you are uncertain how to check your water pressure.

• Do not install where water hammer conditions may occur. If water hammer

conditions exist you must install a water hammer arrester. Contact a plumbing

professional if you are uncertain how to check for this condition.

• Where a backflow prevention device is installed on a water system, a device for

controlling pressure due to thermal expansion must be installed.

• Do not use a torch or other high temperature sources near system, cartridges,

plastic fittings or plastic plumbing.

• Do not install in direct sunlight or outdoors.

• Do not install near water pipes which will be in path of a drilling tool when

selecting the position to mount the bracket.

• Mount system in such a position as to prevent it from being struck by other

items used in the area of installation.

• Ensure that the location and fasteners will support the weight of the system

when installed and full of water.

• Ensure all tubing and fittings are secure and free of leaks.

• Do not install unit if collet is missing. Contact 800-558-5700 if collets are

missing from any fittings.

• Do not install using rigid piping. System intended for use with plastic water lines

(such as PEX tubing, PE tubing, PP tubing).

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

InSinkErator F-1000S Instruction Manual Page 4

Comments to this Manuals